Tensar Asphalt Reinforcement Products

Tensar Asphalt Reinforcement Product Range

Tensar provides four different product products for asphalt reinforcement:

Tensar AR-G

Tensar AR-G is a composite product comprising a stretched polypropylene grid thermally bonded to a fabric backing. Fabric backing facilitates installation and provides a long-term sealing effect once saturated with bitumen. Owing to the 3-dimensional geometry of the grid, the new asphalt layer is mechanically interlocked into the grid's wide apertures, thus providing both reinforcing and sealing functions.

Tensar AR1

This is identical to AR-G but without the fabric backing, AR1 has open apertures to allow layer to layer bonding through the grid.

Tensar Glasstex

Tensar Glasstex® is a composite product comprising a grid of glass filaments stitch bonded to a non-woven fabric. The high modulus glass filaments provide high absorption of stress at low strains. After being saturated with bitumen the fabric performs a sealing function. Glasstex® provides reinforcement, stress relief and sealing functions.

Tensar Glasstex®Grid

Glasstex®Grid is a grid of coated glass filaments with an adhesive backing. It has open apertures to allow layer to layer bonding and provides reinforcement in a fully bonded layer system. The open area structure (approx 50%) of the grid strikes a balance between the essential bonding between the layers and stress relief effect to dissipate the stress on each side of the crack.

Click here for more information on any of these products.

A selection of relevant brochures that may be downloaded are listed on the top right of this page. Alternatively click here for a full list of relevant brochures and case studies